EMCO Remote Installer - Release Announcements

Version 3.10.5 is available

Thu, 08 Oct 2009 17:47:00 GMT

New and improved features

Features below were firstly introduced or significantly improved in this release:

Introduced Windows 7 and Windows 2008 support

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Buttons alignment on the toolbar

Learn more: EMCO Remote Installer

Version 3.10.4 is available

Tue, 24 Feb 2009 14:35:00 GMT

Improved software inventory report

Software inventory report was reworked to improve labels, layout and data representation.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Loose saved scans for Entire Network after closing of application
Hang up after clicking on See log file link in case of error
Potential Access Violation on PCs or domains deletion from the Machine Tree

Learn more: EMCO Remote Installer

Version 3.10.3 is available

Fri, 06 Feb 2009 17:12:00 GMT

Improved network scan performance

The overall time required to make a network scan and retrieve information about installed applications was reduced on 10-15%. Also application installation and uninstallation mechanism was optimized.

Path to the Log file

If you would like to change the path to the Log file, now you can use Save As dialog that points the current log file location.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Representation mode switching in Preferences has no influence on the list of displayed PCs
Incorrect work of the Registry conditions

Learn more: EMCO Remote Installer

Version 3.10.2 is available

Wed, 24 Dec 2008 13:20:00 GMT

Large Fonts (120 DPI) Support

All application dialogs and forms were updated to have a good look when Small and Large Windows Fonts are used on desktop.

Separate Credentials for Groups/Domains

Now it's possible to set credentials separately for every domain/workgroup. During a network scan credentials are prompted once for a domain/workgroup and applied for access to all PCs in the group.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Potential access violation during a network scan
PCs can't be removed from the Machines Tree
Failure during a search for installed applications

Learn more: EMCO Remote Installer

Version 3.10.0 is available

Tue, 05 Aug 2008 16:56:00 GMT

UI improvements

Few visual improvements were applied, including forms polishing and using of new icons set.

Add multiple computers to the Favorites tree

Set of options for adding computers to the Favorites tree was extended. Now Add computers dialog includes new option Group of Computers that allows adding multiple computers in one step if they have regular names.

For example, if computers named like ws001, ws002, etc., their names consist of the same base name and sequential numbers, and you can add all these computers to Favorites in one step by selecting Group of Computers option. When this option is selected, you have to enter base name and range of numbers. In this case computer names will be generated automatically and placed to Favorites tree.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Potential access violation during enumeration of installed applications.
Invalid Row Access error happens sometimes when selection on the Installed Application grid is changed.

Learn more: EMCO Remote Installer

Version 3.9.1 is available

Mon, 23 Jun 2008 15:01:00 GMT

One-click MSI installation

New MSI installation engine allows you to install MSI just by one click. You don't need to care about installation of special service to remote computer - if required it's performed automatically in scope of installation operation.

Alternate credentials improvements

Now you don't need to specially define alternate credentials. Instead you can perform required operation and in case if you don't have enough permissions, then you will be prompted to enter new credentials to proceed.

Security improvements

In order to prevent any potential non-authorized usage of installation service and avoid intruder's penetration, application security system was revised. Following security aspects were affected:

Option to save username and password was removed in spite of the fact that this information was stored in encoded form. For better security now you will be asked to enter credentials at every startup.
Information from Favorites tab is kept in user's profile, so other users don't have an access to this data.
The lifetime of installation service is the same as the amount of time the operation of installation/uninstallation takes. At the end of the installation/uninstallation operation service stops itself and terminates.
In case of any failure of the operation a full rollback is performed.

Logging improvements

Logging operations were extended to contain detailed information regarding successful of unsuccessful results of installation, including following:

The name of remote computer the installation was made from
The name of application that was installed
The result of installation and detailed error message in case of an unsuccessful installation

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Problems with installation from Vista and Server 2008 to remote computers working under x64 platforms (XP, Vista, 2003, 2008).
Failed installation in networks with DHCP server, where IP addresses on remote computers can change often.

Learn more: EMCO Remote Installer

Version 3.6.2 is available

Mon, 24 Mar 2008 13:03:00 GMT

Favorites tree improvements

Now you are able to create groups of computers in the Favorites tree. This feature can be useful if you would like to make installations on subset of computers in your network. Instead selection computers manually in the tree each time when you want to perform operation, you can create special group in the Favorites tree once, place computers into these group and later operate with this group as a whole.

Remote Installer provides an ability to add the same computer to different groups. In order to add computer to the group you should specify group name as the Domain Name field on the Add Computers dialog.

Logging improvements

Logging engine was significantly improved. Now in case of operation failure you get more exact and detailed information about reasons, which significantly simplifies solution finding. For example, in case of remote installation failure you can see all details directly in the log.

Log is extremely helpful for troubleshooting, thus we made it persistent. You are able to close Remote Installer without loosing error logs - they will be still available at the next start or in the log file. Path to persistent log file can be defined in the File > Preferences... dialog.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Validation error in the Add Computers to Favorites dialog
Small UI improvements: forms polishing, labels alignment, etc.

Learn more: EMCO Remote Installer

Version 3.6.1 is available

Wed, 07 Nov 2007 17:16:00 GMT

Reports

Now you can not only to save scan results, but also to generate and print report, which includes scan results. Also report can be generated for scan comparison, so you get a print copy of installation changes. Reports generation is available through Report item in the main menu.

User Account Control (UAC) support on Vista

You don't need to launch Remote Installer using 'Run as Administrator' command under Vista now, because it is automatically executed with administrative permissions. If you are not computer administrator, you will be prompted to enter administrative credentials.

History of project root paths

Remote Installer allows installation not only msi packages, but also projects of MSI Package Builder. In order to install MSI Package Builder project you need to path to directory, projects are stored. You can enter path to new project storage in Preferences dialog or switch to one of previously used paths by selecting it from combo-box.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Access Violation at program startup
Connection to Remote Registry Service

Learn more: EMCO Remote Installer

Version 3.6.0 is available

Tue, 17 Apr 2007 14:37:00 GMT

Windows Vista support

Remote Installer becomes Windows Vista compatible. You can perform remote installation and all other actions on computers where Windows Vista is installed.

64-bit Windows versions support

A list of supported operation systems was supplemented by 64-bit platforms like Windows Vista x64 and Windows 2003 x64. Remote Installer was improved to work under these platforms.

MSI Package Builder projects deployment

Deployment options in Remote Installer were extended. In addition to option of remote MSI packages installation you are able to deploy MSI Package Builder project remotely. This option allows to avoid special service installation on remote computers, so is a benefit for high secure networks. Such type of deployment also doesn't require presence of Windows Installer 3.1 on remote computers, which is also a plus.

This new option tightly integrates MSI Package Builder and Remote Installer - you can deploy MSI Package Builder projects directly, without MSI package generation. You can browse projects, available for deployment on Packages tab. In order to deploy project you should select in Packages tree, select computers, where project should be installed and select Packages > Deploy Package menu item.

Version of the remote service

Remote Installer checks version of remote service in order to prevent usage of old versions, which doesn't compatible with newest versions of Remote Installer. In case is such incompatibility found you can see it on the Log tab.

User interface localization

MSI Remote Installer interface and integrated documentation is available on English, German, French, Spanish and Russian languages. You can easily switch application to another language using Language menu.

Improved data validation

Data validation mechanism on dialogs assists you with data entering by providing hints and data verification. Existing data validation was extended by new checks and added to all dialogs.

Optimization of network operations

Performance of network operations was increased. As a result operations like network scanning are more responsive and large networks scanning takes up only a few seconds.

Resolved issues

This release contains a set of resolved issues, including most important ones, listed below:

Install MSI with Reboot computer option
Scan deletion
Multilanguage data support on the Registry Conditions dialog
Replacement of User name field to combo-box on the Install Service dialog
Current Scan deletion before a new scan

Learn more: EMCO Remote Installer